These paint stains can come in latex water borne or alkyd base and water clean up.
Putting a solid color stain on cedar siding.
If your cedar wood and siding already has this type of paint stain on it you are required to put something very similar for a new coating.
As with paints 100 acrylic latex stains are recommended.
Thus solid color stains let some of the cedar s grain show through but none of the color.
After you have washed it wait for it to dry before applying any stain to the cedar.
Cedar siding is a durable and attractive siding material but it requires protection from sunlight and moisture.
After the primer has dried apply one or two topcoats of paint or solid color stain.
Cedar shingles contain extractives that bleed to the surface when the wood becomes wet and then darken as the wood dries.
Your typical exterior paints being 100 acrylic is not meant for cedar siding where as a solid body paint stain is.
Staining cedar with a solid color stain.
Either types of solid coatings are good most having the words fence and siding.
Solid color stain is not supposed to peel like paint does when applied to cedar siding.
It comes in many colors to choose from and can help customize your home.
This is an advanced formulation that can stain and protect your cedar wood siding from the wear of any weather.
These may be applied to western red cedar by brush roller or pad.
Solid body paint stains looks like paint but soaks into wood protecting it even further than priming with a high bonding primer first putting a solid acrylic paint on top.
Many factors can contribute to this problem.
The best way to prevent extractive bleed is to select a paint or stain that forms a seal over the cedar.
Transparent finishes stains transparent and semi transparent stains.
Plus this type of stain is excellent at repelling water.
The unfortunate reality is that peeling solid color stain is a common occurrence.
You can apply this on any wood surface even if you just cleaned it out a little bit.
Use a thick brush when staining.
Therefore you need to apply perfect finishing coats on cedar siding.
In most cases the solid color stain will usually be close to a matte finish.
One of the most thorough methods when staining is to use a thick natural bristle brush.
The upside is that solid color stains will block most damaging ultraviolet light.
Solid color stains have solid particles but not nearly as many as paint.
Prepare your cedar siding by washing it with soapy water to remove any dirt or dust if any has accumulated.
Those extractives can even bleed through many types of paint.
It is a water based stain that has a semi transparent finish.
What you get is a very uniform opaque color.
Allow the washed surface to dry before recoating and apply primer paint to areas of bare wood.
There are two common types of finishing wood siding.
When it comes to recommended usage do apply a stain blocking primer before applying solid color stain but don t use an oil based solid color stains over a latex primer.
